I made it Off Topic
Posted 06 May 2015 - 07:42 PM
So my setup for playing Rose Online later on when i have more then 1 Character to play with right now i only started so i only have just my Cleric sadly i've only been playing for about 2 weeks now.
Pictures were taken using my Nexus 7 Tablet don't have a decent camera yet heh!
Too Legit To Quit
Posted 06 May 2015 - 08:30 PM
I just want any of them.
I use 3 clients on my pentium laptop. (cry a river)
Too Legit To Quit
Posted 06 May 2015 - 08:47 PM
Too Legit To Quit
Posted 07 May 2015 - 04:08 AM
I just run 9 clients on one 49 inch screen... whilst I chill on my couch
--- I've been considering hooking up more computers to run venders.... technically I can run them off the same screen...
Your setup is pretty cool tho.
You should make a keyboard mod that makes all the f1 buttons on one keyboard, but runs to each PC - so it becomes a keyboard of just 3 lines of f1-f12 keys.
GL with that tho 
Edited by TheRealCaNehDa, 07 May 2015 - 04:09 AM.
Raider Representative
Posted 07 May 2015 - 05:19 AM
Nice setup
here's mine
Too Legit To Quit
Posted 07 May 2015 - 12:04 PM
@Bob -
I have a similar set up, but I use HDMI instead of DVI, 1 less cord for less clutter.
I made it Off Topic
Posted 07 May 2015 - 02:19 PM
I can control all them computers without breaking any Terms of Service using a program called Synergy http://synergy-project.orgI just run 9 clients on one 49 inch screen... whilst I chill on my couch
--- I've been considering hooking up more computers to run venders.... technically I can run them off the same screen...
Your setup is pretty cool tho.
You should make a keyboard mod that makes all the f1 buttons on one keyboard, but runs to each PC - so it becomes a keyboard of just 3 lines of f1-f12 keys.
GL with that tho
Too Legit To Quit
Posted 07 May 2015 - 06:39 PM
can I use one monitor for this program?
I made it Off Topic
Posted 08 May 2015 - 12:47 AM
can I use one monitor for this program?
That program will allow you to control more then 1 PC Using a single computer the way you use it is their is a section on that program where you need to setup the way your computers are placed around you for example lets say you have 2 monitors one to the left and one to the right of you and maybe a laptop on the left of your other monitor...
Well you'd place two computers to the left side and one monitor to the right side this tells the program which way you way the mouse to go a cross the screens to get to each computer or computer.
I'd try to take a screen shot when Rose Online is up so you can see.
That program works as a client and server the client will control the servers which you would install on the other computers you will control with client keyboard and mouse.
You really only need 1 keyboard and mouse to control more then 1 computer.
But yes it will work with more then 1 monitor
Edited by wlan0, 08 May 2015 - 12:47 AM.
Too Legit To Quit
Posted 08 May 2015 - 02:04 AM
You didn't understand my question - but I guess I didn't make it clairvoyant.
Will it work with, ONLY one monitor? - is there ways to switch around within the screens by doing something similar to alt tabbing?
I guess the program wouldn't be much helpful to me anyway, I can change the input selection on my TV quite easily. -- can run 4 HDMI cords to it, and 1 DVI--- , I have more ports than PC's
What are the stats on those computers?
Edited by TheRealCaNehDa, 08 May 2015 - 02:23 AM.
I made it Off Topic
Posted 08 May 2015 - 02:41 AM
Ohh you're talking about using one monitor to control all of them computers its been a couple years since i used it so im not sure if you will be able to see what you're clicking on you'd need something like Team Viewer or TightVNC if you wanna control more then one computer with only one monitor.
Summary
Operating System Windows 8.1 Pro 64-bit
CPU AMD FX-8350 Black Edition Vishera 8-Core 4.0GHz (4.2GHz Turbo)
RAM 16.0GB Dual-Channel DDR3 @ 419MHz (9-9-9-27)
Motherboard ASRock 970 Extreme3 (CPUSocket)
Graphics 1950w (1366x768@60Hz) 1023MB NVIDIA GeForce GTX 650 (MSI)
Storage 232GB Samsung SSD 840 EVO 250GB (SSD) 931GB TOSHIBA DT01ACA100 (SATA)
The other Desktop i have off but its an
AMD Phenom II X6 1100T Black Edition Thuban 6-Core 3.3GHz, 3.7GHz Turbo
GIGABYTE GA-870A-UD3 AM3 AMD 870 6 x SATA 6Gb/s USB 3.0 ATX AMD Motherboard
PNY GeForce GTS 450 (Fermi) 1GB 128-Bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
don't remember off hand how much ram and what kinda ram is in that machine i built it way back in 2011 so its kinda old needs an upgrade.
the laptop is an
HP EliteBook 8540w
CPU: Intel Core i7-620M Processor (2.66 GHz, 4MB L3 cache) Up to 3.33 GHz with Intel Turbo Boost Technology
RAM: 8 GB DDR3 PC3-10600 SDRAM (1333 MHz)
GPU: NVIDIA Quadro FX 880M graphics with 1GB dedicated DDR3 video memory
SSD: Kingston SSDNow V300 Series 120 GB
HDD: 250 GB 7200 rpm
Recently bought the laptop haven't tried to play any games with it just yet was wanting to try Rose Online out with it see how the Temps run on it.
I'ts a Mobile Workstation so its really not meant for playing games on it.
Too Legit To Quit
Posted 08 May 2015 - 03:06 AM
I am so jelly you could put me on a butter knife and spread me on toast.
Raider Representative
Posted 08 May 2015 - 04:53 AM
nope, not Teamviewer - you want something which works via your lan network. Windows remote desktop should be the way to go (the framerate would be pretty bad though).
That's why you would want to use a KVM switch.
Edited by SlowBob, 08 May 2015 - 04:58 AM.
I am New.
Posted 10 May 2015 - 04:38 AM
Ohh you're talking about using one monitor to control all of them computers its been a couple years since i used it so im not sure if you will be able to see what you're clicking on you'd need something like Team Viewer or TightVNC if you wanna control more then one computer with only one monitor.
Summary
Operating System Windows 8.1 Pro 64-bitCPU AMD FX-8350 Black Edition Vishera 8-Core 4.0GHz (4.2GHz Turbo)
RAM 16.0GB Dual-Channel DDR3 @ 419MHz (9-9-9-27)
Motherboard ASRock 970 Extreme3 (CPUSocket)
Graphics 1950w (1366x768@60Hz) 1023MB NVIDIA GeForce GTX 650 (MSI)Storage 232GB Samsung SSD 840 EVO 250GB (SSD) 931GB TOSHIBA DT01ACA100 (SATA)
The other Desktop i have off but its an
AMD Phenom II X6 1100T Black Edition Thuban 6-Core 3.3GHz, 3.7GHz Turbo
GIGABYTE GA-870A-UD3 AM3 AMD 870 6 x SATA 6Gb/s USB 3.0 ATX AMD Motherboard
PNY GeForce GTS 450 (Fermi) 1GB 128-Bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
don't remember off hand how much ram and what kinda ram is in that machine i built it way back in 2011 so its kinda old needs an upgrade.
the laptop is an
HP EliteBook 8540w
CPU: Intel Core i7-620M Processor (2.66 GHz, 4MB L3 cache) Up to 3.33 GHz with Intel Turbo Boost Technology
RAM: 8 GB DDR3 PC3-10600 SDRAM (1333 MHz)
GPU: NVIDIA Quadro FX 880M graphics with 1GB dedicated DDR3 video memory
SSD: Kingston SSDNow V300 Series 120 GB
HDD: 250 GB 7200 rpm
Recently bought the laptop haven't tried to play any games with it just yet was wanting to try Rose Online out with it see how the Temps run on it.
I'ts a Mobile Workstation so its really not meant for playing games on it.
0.0 That's like NASA's computers..
Amateur Blogger
Posted 10 May 2015 - 03:58 PM
Too Legit To Quit
Posted 11 May 2015 - 12:37 AM
SelfBuild
along with 3x 24" monitors, besides you guys should stop using projects or use multiple computers, just hook up an extra monitor to your laptop or pc and use your mouse to cross the monitors, or use alt+tab if logged in more than 3-4 clients?
I made it Off Topic
Posted 13 May 2015 - 01:45 PM
Motherboard: Asus ROG Maximus VI hero
-Processor :Intel haswell i7 4770k Overclocked to 4,6 ghz
-Graphic card: Asus GTX780-DC2OC-3GD5 overclocked to 1032 mhz boostclock
-PSU Corsair AX 760 watt , 80+ platinum
-Case: aerocool Xpredator ( FUll ATX format)
-Ram 2* 8 gb corsair vengance ddr3 @ 1600 mhz
-DVD reader Asus DRW-24B5ST
-Blueray reader LG something , was laying around so i mounted it 
-wifi adapter : ASUS PCE-A66
-SSD 256 GB samsumg 840 PRO serie
-Cpu fan cooler master hyper 212 evo
- HDD 1 TB seagate barracuda @ 7200 RPM
-Display 1: ASUS PA 248Q , 24 inches 1900*1200 resolution connected through displayport
-Display 2 : Samsung Syncmaster 22 inches 1900*1080 resolution connect through DVI
I made it Off Topic
Posted 13 May 2015 - 02:48 PM
along with 3x 24" monitors, besides you guys should stop using projects or use multiple computers, just hook up an extra monitor to your laptop or pc and use your mouse to cross the monitors, or use alt+tab if logged in more than 3-4 clients?
ROSE Developer
Posted 17 May 2015 - 07:07 AM
Edited by Genesis, 17 May 2015 - 07:22 AM.
Too Legit To Quit
Posted 17 May 2015 - 07:39 AM
Gen, will you come play rose with me?
They pay me to post.
Posted 17 May 2015 - 08:04 AM
Too Legit To Quit
Posted 17 May 2015 - 10:47 AM
wew mine setup is just crappy and all this makes me feel jealous 
Raider Representative
Posted 17 May 2015 - 01:42 PM
Ah well, my setup:
Peripherals:
0 members, 0 guests, 0 anonymous users
