Prize Medals?
#1
Posted 27 June 2012 - 12:19 PM
#2
Posted 27 June 2012 - 12:21 PM
you go ti einbroch to the machine factory near the bottom
#3
Posted 27 June 2012 - 12:22 PM
#4
Posted 27 June 2012 - 12:23 PM
#5
Posted 27 June 2012 - 12:25 PM
#6
Posted 27 June 2012 - 01:02 PM
#7
Posted 27 June 2012 - 01:17 PM
Edited by Helios0, 27 June 2012 - 01:18 PM.
#8
Posted 27 June 2012 - 01:42 PM
it has huge deminishing returns.. at lvl 150 job 41 it took about 6000 medals to go 1 or 2 job lvl
Diminishing returns? Lol what is this thing you speak of! Hasnt been heard since pre-renewal.
#9
Posted 27 June 2012 - 03:10 PM
#10
Posted 27 June 2012 - 03:15 PM
#11
Posted 27 June 2012 - 03:17 PM
Can you elaborate further on this please?it has huge deminishing returns.. at lvl 150 job 41 it took about 6000 medals to go 1 or 2 job lvl
Are you saying that if, you're lvl 150, the Medal becomes less worthy?
#12
Posted 27 June 2012 - 03:24 PM
Look on irowiki.org for the EXP tables... you need an insane amount of JOB EXP vs. BASE EXP. And your job EXP reward from the medal turn in is based on your base level so once you hit 150 you are getting the max per medal that you can get... you just need like 3x more medal to go 1 job level than one base.Can you elaborate further on this please?
Are you saying that if, you're lvl 150, the Medal becomes less worthy?
#13
Posted 27 June 2012 - 03:26 PM
while you are low level it might take a dozen medals to level up
the closer you are to 150/50 the more you will have to use hundreds and hundreds if not thousands of medals to see any visible increases to a single job or base level
regarding job levels,
always use whatever medals you plan to use for base before you touch job levels
there are certain Checkpoints where once you reach a certain level, each coin will give more job exp
since job levels cost a lot more to raise you want to make sure your getting the most bang for your buck
Edited by Helios0, 27 June 2012 - 03:28 PM.
#14
Posted 27 June 2012 - 04:07 PM
#15
Posted 27 June 2012 - 04:11 PM
#16
Posted 27 June 2012 - 04:13 PM
#17
Posted 27 June 2012 - 04:18 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users