Failure To Connect Glitch After Update
#1
Posted 06 April 2011 - 03:20 PM
#2
Posted 06 April 2011 - 03:48 PM
#3
Posted 06 April 2011 - 03:48 PM
Any idea when there back up ?I think the servers were/are still down for maintenance.
#4
Posted 06 April 2011 - 04:04 PM
1.RagnarokFree.exe
2.Renewal.exe
3.valkyrie.exe
Edited by Dukeares, 06 April 2011 - 04:05 PM.
#5
Posted 06 April 2011 - 04:29 PM
btw..We will also need to patch all these 3 exe in our RO folder for the 6 April's Launch. as can bee seen in these link www.playragnarok.com
1.RagnarokFree.exe
2.Renewal.exe
3.valkyrie.exe
I updated all three, and its still showing me the fail error so I assume they are still being worked on. Hmmm. Where does it tell me when the server is down and such?
#6
Posted 06 April 2011 - 04:39 PM
#7
Posted 06 April 2011 - 04:40 PM
#8
Posted 06 April 2011 - 04:41 PM
i've done it (started the ragnarok.exe patch) but when i clicked the "start" button, nothing happens..
can anyone help me?
#9
Posted 06 April 2011 - 06:02 PM
#10
Posted 06 April 2011 - 06:04 PM
As well, we will also be having maintenance tomorrow.
#11
Posted 06 April 2011 - 06:07 PM
#12
Posted 06 April 2011 - 09:14 PM
#13
Posted 06 April 2011 - 10:06 PM
#14
Posted 07 April 2011 - 04:38 AM
Same here too....still can't log in the game in my Valkyrie.
I'm pretty sure that iro still in maintenance...
#15
Posted 07 April 2011 - 04:45 AM
Alot of people have trouble patching, try reading up on some fixes mentioned here and there (http://forums.warppo...nect-to-server/). Also make sure that anything you do ro-related (patching, installing, playing) is done under "run as admin mode".
#16
Posted 07 April 2011 - 04:47 AM
There is no longer any server maintenance (until later today, normal thursday maint).
Alot of people have trouble patching, try reading up on some fixes mentioned here and there (http://forums.warppo...nect-to-server/). Also make sure that anything you do ro-related (patching, installing, playing) is done under "run as admin mode".
Hello, Good Morning...
Yes im running my valkyrie client in mode-administrator as you mention, i will take a look at that guide.
#17
Posted 07 April 2011 - 04:52 AM
Also, we now connect via ragnarok.exe.Hello, Good Morning...
Yes im running my valkyrie client in mode-administrator as you mention, i will take a look at that guide.
You should only run the valk client once, after that is patched, close that and run ragnarok.exe (also in admin mode), ragnarok.exe is the client everyone should now use to connect.
Edit: typo
Edited by Chucklet, 07 April 2011 - 04:52 AM.
#18
Posted 07 April 2011 - 04:58 AM
Also, we now connect via ragnarok.exe.
You should only run the valk client once, after that is patched, close that and run ragnarok.exe (also in admin mode), ragnarok.exe is the client everyone should now use to connect.
Edit: typo
Yes, I follow the guide at the foot of the sheet, and worked 100% now i can connect to the server
Thanks for your help!
PD: It is possible that i can make a brief guide of how to patch manual ro?
#19
Posted 07 April 2011 - 05:08 AM
You're welcome.Yes, I follow the guide at the foot of the sheet, and worked 100% now i can connect to the server
Thanks for your help!
PD: It is possible that i can make a brief guide of how to patch manual ro?
I guess it won't hurt anyone to have a quick guide instead of having to run around tech/bug support to read up all scattered posts. They will put out a new client later tho.
Edit:
Just found this on their main website (I never go there), they already beat you to it :
http://www.playragna...slist.aspx#n845
We have updated to VIP system and Brasilis on April 6th. There are 2 options available for patching correctly.
Regardless if you have freshly installed the October 2010 client, or have been playing for quite some time and patching every week, you will have the same patch methods.
Patching using the normal Patch Client:
- Navigate to your Ragnarok installation folder,
- Right click on the folder and make sure "Read-Only" is UN-CHECKED, then apply.
- Enter the folder, and right click the "renewal.exe" and choose Run as Administrator
- The Ragnarok.exe, ragexe.exe and the data.grf should all get updated to April 6th.
- From now on Run "Ragnarok.exe" to patch and play RO.
Patching using the Manual Patch Client:
- Download the Manual Patch to your Hard Drive.
- Navigate to your Ragnarok installation folder,
- Right click on the folder and make sure "Read-Only" is UN-CHECKED, then apply.
- Extract the Manual patch into the RO installation folder, allowing it to overwrite files.
- From now on Run "Ragnarok.exe" to patch and play RO.
In the next week or so a freshly made client will be made available that has VIP and Brasilis included. The small patch size was the reason we didn't make a fresh client yet.
Edited by Chucklet, 07 April 2011 - 05:15 AM.
#20
Posted 07 April 2011 - 08:02 AM
Im trying to finish the video-tutorial
#21
Posted 08 April 2011 - 08:46 AM
Interesting that you say that. I guess we all learn differently.yeah but they didn't do a video-tutorial, a video is better than an image or text.
Im trying to finish the video-tutorial
For me, text/images are best, and video instructions are least useful.
Then again, i used to enjoy lectures in college, so maybe i'm not typical.
#22
Posted 08 April 2011 - 08:51 AM
Interesting that you say that. I guess we all learn differently.
For me, text/images are best, and video instructions are least useful.
Then again, i used to enjoy lectures in college, so maybe i'm not typical.
yes you're right but there's people that doesn't understand very well about informatic (Science computer)
Edit: Cannot found my topic
BTW did you move my thread "how to patch Iro Client"???
Edit: Already checked
Ohh..Thanks for move the topic...sorry for post the topic in the wrong section
Edited by Lorderagon, 08 April 2011 - 09:01 AM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users